■ Easy Remote Viewing Setup
Just plug in the power cord, download "Eye4" App by scanning QR code or visiting download link (included in the user manual), run the app, scan the camera's QR Code then you configure the camera to connect to your router, and then you can access to your camera's video stream in no time
■ Remote Pan Tilt Control
Remotely control the camera to pan and tilt by either drag the image left and right, up and down or simply tap the PT control on the app.
■ Local recording
Record to a microSD memory card or on your phone, so you can easily review the footage from the past. Supports up to 128GB.
□ 1. The camera will not work on a 5G WIFI at this time. If you have a dual-band router, be sure to segregate your wireless channels and connect the camera to the 2.4ghz channel.
□ 2. The camera can record to an internal MicroSD card (up to 64g) which is not included in the package.
□ 3. The password of the camera is: 888888 and the user is admin.
▲ How to do it if the camera cannot connect it?
□ (1) Local area network search to add a camera, make sure that the phone and the camera to use the same WiFi.
□ (2) Delete the UID code you added. Use a long needle Or toothpick press and hold the reset button for 10 seconds, then re connect the camera, you can try several times to restart to connect the camera, restart the button next to the SD card slot.
□ (3) If the WIFI signal is not good, the camera must plug in the cable network in Router and then manually add the camera, and then scan the camera at the bottom of the two-dimensional code or enter the camera at the bottom of the UID code.
➤ 1x UOKOO IP camera
➤ 1x Power Supply
➤ 1x Quick Start Guide
➤ 1x Wall and Roof mount
➤ 2 x Screws / Fittings